SDSL Point to Point

SDSL/SHDSL provide from 2.3Mbps(single pair) to 4.6 Mbps(dual pair) or 9.2 Mbps(four Pair) of symmetrical bandwidth over four pair copper lines.

Net to Net Technologies' SDSL/SHDSL Network Extender subscriber units terminate SDSL/SHDSL lines from the IP DSLAM family of access multiplexers, including the IPD12000, IPD4000, SDSL MiniDSLAM and SDSL MicroDSLAM.

The SNE2000 provider units can also be used in a back to back deployment with the matching subscriber units to provide point to point configuration allowing broadband service providers to deploy single DSL lines economically. This provides an upgrade path for future deployments, using Net to Net's IP DSLAM. I protect investment provider units can be converter to subscriber units using the conversion kit and redeployed in the service providers network.

The subscriber units can also be used with multiport SDSL Network Extender Provider units, providing cost effective backhaul connections.

Because the SNE2000 is fully DSL The Easy Way™ compliant, configuration requirements are removed completely, allowing this device to be installed into the customer premise quickly. The SNE2000 uses the DSL The Easy Way™ Packet based architecture utilizing 100% packet-based technology for optimum throughput and reliability. The SNE2000 products can run CAP, 2B1Q or the SHDSL (TC-PAM) encoding.

T1 Point to Point

Net to Net Technologies' T1 Network Extender terminates T1 lines from the IP DSLAM family of access multiplexers, including the IPD12000 and the IPD4000. Because the TNE1500-S is fully DSL The Easy Way™ compliant, including an integrated CSU/DSU, configuration requirements are removed completely, allowing this device to be installed into the customer premise quickly. The TNE1500-S is also fully IPacket™ compliant, utilizing 100% packet-based technology for optimum throughput and reliability.

In addition, the TNE1500-S can be used in point-to-point configurations with single- or multi- port T1 Network Extender Provider units allowing broadband service providers to deploy single T1 lines economically. This provides an upgrade path for future deployments using Net to Net's IP DSLAM. The TNE1500-S provides a simple and easy way to extend Ethernet over T1 circuits. The TNE1500 series of T1 Network Extenders support up to 1.5 Mbps while the TNE1520 series supports up to 3.0 Mbps.

Part Numbers:

• TNE1500-Kit-1 Single Line
• TNE1520-Kit-1 Dual Line